IntelliPRIMA uses a standard CDQ Prima-to-PC serial connection lead
This is NOT a standard RS232 cable!

If you haven't already got one of these, you can make your own or order one from us at
the same time as purchasing the software. Click here for Cable Prices.

If you plan on making your own, you should note that the pin-outs on the CDQ Prima are not standard RS232 connections. The correct format for the cable is shown on this page.

CDQ Prima (requires DB9M connector) Pin 4 RxD Pin 9 TxD Pin 5 Gnd

Connect cables following the colour code shown - i.e. blue-blue, red-red and green-green

PC (requires DB9F or DB25F connector)     Pin 2 TxD Pin 3 RxD Pin 7 Gnd     Pin 3 TxD Pin 2 RxD Pin 5 Gnd

CDQ Prima rear panel RS232 remote control cable instructions